Night lamp made of polymer clay. Plafond from polymer clay Make a chandelier from polymer clay

10.12.2021

"A lamp with your own hands, in fact, is very easy to make. I offer a small master class on this topic. At the same time, they also look very original: floor lamps, table lamps, all kinds of candlesticks.

A minimum of imagination, a little manual labor and you get a whole direction in the topic of interior lighting. And best of all, you don't have to pay for it! It is enough to arm yourself with your own imagination and the necessary materials. We will make a lamp out of plastic, or as it is also called, polymer clay.

Sculptors from Aton Studio (Canada) came up with an interesting and very simple way to make designer lamps. Have you figured out how to make them yourself? I'm telling!

There is now such a material - plastic clay. It comes in different textures, including in the form of a paste. You can buy it at art supply stores. There are such stores in any more or less large city. As you can see, there will be expenses, of course, but not as significant as if you decide to buy a ready-made lamp in a store.

So, what do we need to make the same lamp with our own hands?

And so to make such lamp we will need:
#1: milk carton, you can some other packaging, such as a box of juice. If you have plans to make a cylindrical shape of the lamp, then in such cases they use a tube, a vase or a simple bottle from something.
No. 2: polymer clay.
#3: fantasy.

Let's get down to creation.
We take a box and wrap it with a film so that the clay does not stick and so that there are no problems when we shoot the creation.

After we take polymer clay and squeeze it in an arbitrary direction onto the outer part of our workpiece (a cardboard bag from under milk).

After when our box is beautifully coated with clay, we let our work dry.

After that, carefully take out the box from under the shell of our resulting lamp.

We install the shell of the lamp on the structure with a light bulb. All the lamp is ready - you can start using it.

It happens that you want to do something similar, but you can’t find clay. There is a way out, it can be replaced with a liquid nail or a hardening sealant. Here's an example for you:

I really liked the idea of how
FORMULATE A LAMP

They are tritely simple to make and at the same time they look very original: table lamps, floor lamps and all kinds of candlesticks. A minimum of imagination, a little manual labor and again we get a whole direction in the topic of interior lighting.

Sculptors from Aton Studio (Canada) came up with an interesting and very simple way to make designer lamps. Have you figured out how to make them yourself? - I'm telling...

There is now such a material - plastic clay. It comes in different textures, including in the form of a paste. You can buy it at art supply stores.

Handmade

SO. We take a cardboard bag from juice, or any other packaging, a box, a tube from a roll of paper. And we squeeze this clay out of the package in a chaotic artistic mess onto a blank. We give our work to dry properly, crumple or carefully pull out the box and put our work on the base with a light bulb. Everything - the lamp is ready.

If you can't find clay, liquid nails or hardening sealants / putties / fillers will gladly replace it. The principle of creating a lamp is the same.
fastory.ru

Polymer clay, or as it is otherwise called, thermoplastic, is a material that resembles plasticine in texture and consistency. After heat treatment, the plastic takes on a solid form. Various jewelry is made from it - rings, bracelets, necklaces, pendants, earrings, as well as souvenirs, such as magnets and figurines, lamps and photo album covers, photo frames and wine glasses, toys

m.dhgate

In order to start this type of needlework, you need to purchase the necessary materials. These include:

Polymer clay;

Special varnish;

Solid work surface;

Stationery knife;

Various sticks and stacks;

Gloves;

For a more advanced lesson, you will need to purchase various professional materials - a special syringe with many nozzles, a pasta machine, cutting molds and other items. But it is worth paying attention to this when it is precisely determined that a person will continue to sculpt. Otherwise, he will just waste his money.

Before buying thermoplastics, it is better to decide in advance on the color of the material. You should be guided by what product is intended to be made. It is recommended to definitely buy a white bar to dilute it with especially bright colors.

To give the creations shine and color saturation, the finished product is varnished, which can be purchased at a store specializing in art supplies or in building departments. Lacquers are matte and glossy.

The working surface must be smooth to avoid material particles getting into its structure. Glass, tile or plain paper is best.

For a clear cut of clay, it is recommended to use a sharp clerical knife. The sharper it is, the less the product is deformed during operation. Stacks and sticks serve to give the object outlines, various depressions and other subtleties of design.

So that fingerprints do not remain on the finished product, which can spoil the whole appearance, you should use gloves when working with clay, they can be purchased at a pharmacy. It is important that they fit snugly around the hand for ease of use.

Foil is used in the heat treatment of products. A kind of stand is formed from it or the surface on which the product will be baked is simply covered.

After creating a masterpiece, you must place it in the oven or a specially purchased stove, after which the product will become solid. Then it needs to be treated with varnish, allowed to dry, and it will be ready for use.

paulagold.tumblr

wandadesigns.blogspot

People who gush with creative ideas are always admired. It would seem that they make piece, exclusive things from unnecessary rubbish. What is an empty juice bag for? Or a paper roll? For ordinary people who do not have a creative beginning, the answer is obvious - they can only be disposed of. But there is no need to rush. From such unnecessary everyday things, you can try to make clay lamps with your own hands, while getting an absolutely incredible thing.

For the manufacture of lamps from clay, you can use both ordinary clay and polymer clay.

The material for the model is polymer clay, or, as it is also called, plastic. It is a mass that looks like plasticine. Some species need to be “hardened” at home by baking in the oven. But there are also clays that dry naturally. They can be dyed in different colors or have a natural base. Clay lamps can be used in rooms with high humidity, which allows you to beautifully decorate the bathroom, sauna and other rooms.

For the first time, plastic clay received distribution in the 30s, in Germany. At first, doll heads were made from it, which were completely identical in quality to porcelain. Then the use of clay spread throughout the world. Products from it amaze the imagination: dolls, Christmas decorations, fairy-tale houses, lamps. They make completely different things from clay, stream production is rarely staged. The mass is produced in packages in a separate piece or in tubes similar to toothpaste. It is convenient to apply such material with fantasy strokes, and the clay lamp will be piece.

In order to create an unusual interior in your home, add romance and coziness to it, handmade clay lamps will come in handy. A beautiful chandelier can be successfully replaced. Examples can be seen on the net, but it is better to create your own.

What will be needed for manufacturing?

Clay lamps can be used in rooms with high humidity, which allows you to decorate a bathroom or sauna.

clay;
paper knives for cutting, a film to protect the table from dirt, patterned stencils, you can make them yourself, which completely eliminates the similarity of copies;
a shape for a future clay lamp, boxes and bushings are just right, bottles and cans for drinks are also good;
fine sandpaper, you need to grind the clay lamp to a mirror finish;
needle, perfect shoe.

Workflow steps

You need to start work by warming up the clay with your hands. This is done exactly as with plasticine. The amount of clay depends on the size of the mold. It should be enough to completely wrap the desired caliber. During work, hands should be moistened with cold water, then the clay will not stick to them, and its particles will not remain on the table or oilcloth.

Plastic clay is available in packs as a single piece or in tubes similar to toothpaste.

Next, the clay dough is rolled out with an ordinary rolling pin, specially purchased for this. If you use your own kitchen, then the clay particles will be in the pies for sure. Clay is rolled out with a thickness of not more than 5 mm. The edges can be made thinner so that the wrap is obtained without a thick seam. Then the blank is tried on a template and the excess is cut off, in the future they can also be used.

Then the clay sheet is laid out on an oilcloth and they begin to work. The stencil is superimposed and slightly pressed in so that the pattern is not printed from the inside. Stencil templates can be purchased at craft stores, or can be made from a sheet of plastic bottles with curved edges.

After that, points are pierced along the contours in increments of 5-10 mm. What is it for? When the clay lamp is ready, the light from the lamp inserted inside will pass through the holes, drawing the outline of the ornament. For an interesting combination of lamp colors, holes are made with a needle, at the end of which there is a drop of paint. Then mixing colors gives an interesting result. You can experiment endlessly.

Clay begins to harden within 20 minutes after heating.

After all the manipulations with the pattern, the workpiece is wrapped around the mold and the edges are fastened. This is done as follows: fingers should be moistened with water and gently cover the seam. The bottom is cut out of a layer of clay of the same thickness using a mold, it is simply outlined and then attached to the workpiece in the same way. Now the clay must be allowed to dry. Immediately you need to make a reservation that the clay hardens quickly, it will begin in about 20 minutes after the start of work, so you should hurry. Finally, the product can be dried with a hair dryer. Check for hardness and only then get the form. After that, an almost finished clay lamp can be polished.

Clay lamp can be varnished.

It looks especially beautiful in combination with lamp light. Also, papier-mache technique is used for the desired shape, then clay lamps can be made in the form of anything: flowers, patterns, animals, fairy-tale characters and other fantasies.

Clay lace lamps are very popular. The work of making them is more painstaking than if you make something that does not require complexity. To do this, use cardboard patterns of ornaments or even knitted napkins. The difference between the manufacture of lace lamps and simple ones is that the ornament is cut out with a sharp object in the right places, that is, a clay napkin is made, then wrapped around the desired shape and left to dry.

Some nuances and tricks of work

If there is no special tool, then you can cut out the ornaments with a scalpel.

You need to immediately decide on the purpose of the lamp. If this is a candle stand, it's one thing, but when an electrical part is provided, then it's completely different. The base for the electrical part must coincide with the circumference of one of the sides of the product.
Oilcloth for work should be marked into 1x1 cm cells. This is convenient in order to know exactly the size of your own workpiece. You can take the base of decorative self-adhesive paper for work.
It is very convenient to apply punctures with toothpicks tied together if you want to outline small circles.
It is convenient to cut out the details of the ornaments with a scalpel. Circles are squeezed out using a pencil eraser holder or a felt-tip pen cap.
A dry eyeshadow applicator will help to carefully close the seams. You can carefully put the varnish in hard-to-reach places with a syringe.
A hair dryer will help dry the workpiece faster. You just need to turn on the moderate mode, otherwise the product will crack from sudden drying.
Use the old "pendants" for additional decor: they looked good on the chandelier, they can fit here too.
We must not forget that hardening will begin 20 minutes after the start of work. You need to make it to this time.
Before starting work, a bath of water and a towel should be ready.

Shopping trips in search of a "zest" for your interior can be postponed if you try to use your own hands and imagination. Exclusive handmade items are expensive, so you can reduce costs by using materials that are freely available from the manufacturer, their cost is low. Let clay lamps be the first creative discovery.

DIY lamp, in fact, very easy to make. At the same time, they also look very original: floor lamps, table lamps, all kinds of candlesticks. A minimum of imagination, a little manual labor and you get a whole direction in the topic of interior lighting. And best of all, you don't have to pay for it! It is enough to arm yourself with your own imagination and the necessary materials. We will make a lamp out of plastic, or as it is also called, polymer clay.

So, what do we need to make the same lamp with our own hands?

1

We take an ordinary cardboard bag from kefir, or any other packaging, from juice, for example. If you want to get a cylindrical shape, then you can use a bottle or tube from a paper roll.

2

Then we squeeze polymer clay onto this blank from the bag in an arbitrary direction.

3

We give our work to dry properly, and then carefully remove the base from the inside - a box or a bottle.

4

After that, it is already possible to install our resulting lamp on a structure with a light bulb.

That, in fact, is all the work - the lamp is ready for use.

If it suddenly happens that you do not find clay, then it can be replaced with hardening sealants or liquid nails. Putties and putties will also work. But you need to be more careful with them - they are fragile. In all other respects, the principle of manufacturing the lamp does not change.