V-belts V(B) profile. V-belts profile V(B) Belt 1200 profile a where used

26.03.2020

V-belts are designed to transmit torque between rotating shafts of various mechanisms and machines. They are widely used in machine tool, automotive, agricultural and printing machinery, in special drives, etc. Drive belts of section V (B) are manufactured in accordance with State Standards 1284.1-89 and 1284.2-89 and, depending on the climatic design, can be used in areas with very cold, cold, temperate and tropical climates.

All types of V-belts, including those with a V(B) section profile, are used in power and kinematic transmissions at linear speeds up to 30 m/s. The transmitted power is determined by the number of belts simultaneously working in the drive. The procedure and methodology for calculating V-belts and V-belt drives are given in GOST 1284.3-96.

Belts with a wedge section of profile V (B) are made of technical rubber on a cord-cord basis. Twisted cord is more flexible than cord fabric, so it can be used in drives with small pulley diameters.

Technical specifications

In the design of V-belt drives, the width of the belt along the neutral section line (Wp) is involved in the calculations. The neutral line is understood as a section in which the rubber product does not experience compressive or tensile forces when bending around the driving or driven pulleys. The width on the larger (upper) base in the V-belt drawings is given for reference. Limit deviations from the nominal geometrical parameters in general mechanical engineering are not taken into account (only when designing special equipment or measuring pulleys).

The length of V-belts with section profile V(B) is regulated by GOST 1284.1-89, according to which RTIs are produced in lengths from 630 mm to 6300 mm. At the same time, GOST admits that, under a separate agreement with the manufacturer, it is possible to produce V-belts of non-standard length. To compensate for the error in the length of the belts, as well as to compensate for their stretching during prolonged operation under load, mechanisms and machines must be provided with special tensioners.

Applicability of Finwhale drive belts to domestic car models:

№ catalog	Type belt	Length, mm	brand car	Notes
	wedge		VAZ 2108-2115	Carburetor
	wedge		GAS	Engines ZMZ 21; 24; 402
	wedge		VAZ 2101 -2107; 2121; AZLK 2141 and IZH2126 with VAZ engine	Carburetor
	wedge		GAS 21-3110; 2715-3302; UAZ 469(3151) and all modifications with UMP engines	Engines ZMZ 21; 24; 402
	polyclinic		VAZ 2110-2112	Engine with 16 valves
	polyclinic		GAS	without GUR
	polyclinic		VAZ 2108-2115	8 valves, injector
	polyclinic		GAS 3102-3110; 2715-3302 with engines of the ZMZ 406 family.

Applicability of V-belts on garden equipment:

Belt	belt applicability
	MK KROT until 1986 release
	MK KROT after 1986 release
V(B)-850	Motoblock FAVORITE, TERO-10
	MK KROT with imported engine
	Motoblock Salyut
	Motoblock MB-1 of all brands - forward running
	Motoblock MB-2 (neva)
	Snow blower SM-0.6
	Motoblock Votkinsk, knife mower to MB
Z(O)-1400	Motoblock MB-1 of all brands - reverse
	Motoblock brush ShchM-0.9 until 2009
	Motoblock brush ShchM-0.9 after 2009 release

This table shows examples of the applicability of multi-ribbed drive belts of the RK section:

Size	Applicability
6RK 860
6RK-925
6PK-1220	Engine ZMZ-4061.10 (GAZ-3302); Engine ZMZ-4062.10; (GAZ-31029, 3110); UAZ-3160;
6 RK-1250	Industrial equipment
6PK-1370	GAZ (Volga, Gazelle, Sable); engine ZMZ -406
6PK-1703	Engine KAMAZ Euro-2
6PK-1790	KAMAZ engine
6RK-1630
6PK-1115
	VAZ 2108-2110
5PK-1888	VAZ-2123 "Chevrolet Niva"
6RK-742
6RK-882	VAZ-1118 "Kalina"
10PK-1250
24PК-1250	Seeder "Brestselmash"
16PК-1320

Fan V-belts:

8.5x8-833	GAZ-53A, GAZ-53-92, ZMZ-53-11, UMZ-451MG, ED-181T
8.5x8-850
8.5x8-875	Moskvich-412ie, -412e, Moskvich-2140, Moskvich-2137,4ed-181T
8.5x8x933	Zaporozhets, T-4A, TD-75M
8.5x8-1018	GAZ-24, GAZ-13, GAZ-31, MEMZ-967P, MEMZ-968, (Zaporozhets)
8.5x8-1030	UMZ-451M, UMZ-4146.10, UMZ-417.10
8.5x8-1060
8.5x8-1090
8.5x8-1150
8.5x8-1250
8.5x8-1280	D-21A1, D-120, D-37E, D-144
8.5x8-1320	Ural-744, KAMAZ-740
8.5x8-1348	GAZ-13 "Seagull", GAZ-71, GAZ-73, LAZ-42021, LiAZ-5256
According to TU 38305-8-339-94
10x8-715, 10x8-944 (external length)	VAZ cars
According to GOST 5813-93
11x10-1045	GAZ-53, BelAZ-75211, KrAZ-960, KrAZ-6443, ED-181T, 4ED-181T, EMZ-71, EMZ-73, EMZ-24D, EMZ-3402, EMZ-3403
11x10-1120	SMD-23/24, SMD-31/32, SMD-31A/32A, ZIL-157KD, ZIL-114, Ural-744
11x10-1150
11x10-1180	YaMZ-841, YaMZ-842, YaMZ-8423, YaMZ-840
11x10-1220	ZIL-645, ZIL-157KD, ZMZ-505-10, ZMZ-14
11x10-1250	D-240 (MTZ-80/82), SMD-Z101, D-241L (T-70s)
11x10-1280	ZIL-114, ZIL-117, ZIL-4104, ZIL-41
11x10-1400	GAZ-66, PAZ-672, PAZ-3203, PAZ-3205, ZIL-118K, ZIL-118KA, LAZ-698, LAZ-4202, LiAZ-5251, LAZ-42021
11x10-1450	ZMZ-66-92, ZMZ-3403, PAZ-672, PAZ-320G, LiAZ-5251, ZIL-157L, SMD-18N, SMD-14NG, (DT-75V), SMD-15N, SMD-18, SMD- 186, SMD-19/20, SMD-21/22
11x10-1500	ZIL-555, SMD-14-21
11x10-1600	ZMZ-65-06, ZMZ-3402, SMD-17K/18K, SMD-17KN/18KN, SMD-22, SMD-22-A
11x10-1650
11x10-1775	GAZ-66, GAZ-71, GAZ-73, PAZ-3205
12.5x9-1120	SMD-60 (tr. T-150), SMD-62 (tr. T-150), SMD-74/75, SMD-74/75/76/78, SMD-66 (tr. DT-175S)
According to GOST 5813-93
14x10-887	MAZ-504, KrAZ-258, YaMZ-236, YaMZ-238
14x10-937	MAZ-505, KrAZ-258, YaMZ-238NB(K-700), YaMZ-236, YaMZ-238
14x10-987	MAZ-500, MAZ-504
According to GOST 5813-93
14x13-1280	SMD-23/24, DON-1200, SMD-31/32, SMD-31A/32A, DON-1500, SMD-81(SK-10)
14x13-1320	YaMZ-240B (tr. K-701), KamAZ-740, KamAZ-741, YaMZ-8423
14x13-1600	SMD-23/24, SMD-31/32, SMD-31A/32A, SMD-32-01
According to GOST 5813-93
16x11-1103	ZIL-130, ZIL-157
16x11-1120	GAZ-51, GAZ-52-04, SMD-60 (T-150), SMD-62(T-150K), SMD-74/75, SMD-66 (DT-175s)
16x11-1220	D-50, D-50A (MTZ-50/52)
16x11-1403
16x11-1450	SMD-60 (tr. T-150), SMD-62 (tr. T-150K), SMD-64, SMD-80, SMD-81 (SK-10), SMD-72/74/76/78, D -108, SMD-66 (DT-175S)
16x11-1650	D-160, SMD-72, D-108
19x12.5-1220
19x12.5-1450	SMD-14NG (DT-75V), SMD-14, A-01M, (4-4M), A-41 (DT-75M)
19x12.5-1550	SMD-14K, SMD-15K
21х14-1303	ZIL-157, LAZ-697, LiAZ-677N, MoAZ-6507, MoAZ-7405
21х14-1450	LAZ-697, BelAZ-540, BelAZ-531, BelAZ-7540, BelAZ-75482, BelAZ-75211, BelAZ-75231
21х14-1650	ZIL-130, ZIL-131, Ural-375, KAZ-608V, LAZ-697, LiAZ-677N, ZIL-MMZ-555
21x14-1735	BelAZ-540A, BelAZ-548A, BelAZ-7548, BelAZ-75401, BelAZ-7523, BelAZ-7421, BelAZ-6411
21x14-1950	BelAZ-548A, BelAZ-7548, BelAZ-7523, BelAZ-75232, BelAZ-75231

Fan V-belts with molded tooth without side face facing TU 2564-431-00149311-2006:

No. p / p	V-belt size	V-belt applicability
	AVX 10-850 (I-8.5×850 Lp)	YaMZ engines
	AVX 10-944La (I-10x8-944La)	VAZ-2105, VAZ-2106 and its modifications, VAZ-2107, Niva 2121
	AVX 13-900Lp (I-11x10-900Lp)	"Gazelle" GAZ-2705, 3221, 3302
	AVX 13-1230Lp (I-11х10-1230Lp)	ZIL 5301 and its mod. ("Bull"), Ikarus-260
	AVX 13-1045(I-11×10-1045 Lp)	YaMZ engines
	AVX 13-1400Lp(I-11x10-1400Lp)	PAZ-672, -695M, -696, -697M, -698, -3203, -3205, -4202, 42021, ZIL-118K, ZIL-118KA, ZIL-111, LiAZ-5256, GAZ-66
	AVX 17x10-887Lp (II-14x10-887Lp)	MAZ-504, KrAZ-256, KrAZ-258, K-70
	AVX 17x10-937Lp (II-14x10-937Lp)	MAZ-500, 504, 505, KrAZ-258, tr. K-700, combines YaSK-170, 200, YaMZ-238ND, YaMZ-236 (238ND)
	AVX 17x10-987Lp (II-14x10-987Lp)	MAZ-500, 504, KrAZ 257 and its mod. YaMZ; K-700
	AVX 17×13-1320Lp (I-14x13-1320Lp)	K-700, K-701, MAZ, KAMAZ-740, KAMAZ-741,
	II-21х14-1650Lp	ZIL-MMZ 555, LAZ-6955, 695E, 697, Ural-375, KAVZ-608(V), MoAZ-6507, 7405, LiAZ 677(N), ZIL-130, -131, -157, -158
	II-21х14-1735Lp	BELAZ-7540, 7547, MAZ 544, 537
	II-21x14-1950Lp	BELAZ-7540, 7547

V-ribbed belts:

No. p / p	Belt size	Belt applicability (engine models, car brands and other equipment)


		Engine ZMZ-4061.10 (GAZ-3302) Engine ZMZ-4062.10 (GAZ-31029, 3110), UAZ-3160
		Industrial equipment
		GAZ (Volga, Gazelle, Sobol) engine ZMZ -406
		Engine KAMAZ Euro-2
		KAMAZ engine


		VAZ 2108-2110
		VAZ-2123 "Chevrolet Niva"

		VAZ-1118 "Kalina"
		Machine equipment (milling and grinding machines)
		Seeder "Brestselmash"
		Seeder "Gomselmash", combines "BISON", "Case", KZR-10

Belts made by HanseGermany:

catalog no.	Belt type	Applicability	Note
HR 6PK-698	polyclinic	VAZ 2108- 2115 i
HR 6PK-742	polyclinic	VAZ 2110-2112i
HR 6PK-1125	polyclinic	VAZ with air conditioning
HR 6PK-1220	polyclinic	GA33102-3110, 2715-3302 MS, dv. 406	Without hydraulic booster
HR 6PK-1370	polyclinic	GAZ 3102-3110 PS, 2715-3302, engine 406	With hydraulic booster
HR 6PK 1030	polyclinic	engine GAZ-560 (Stayer)	without hydraulic booster
HR 6PK 1630	polyclinic	engine GAZ-560 (Stayer)	with hydraulic booster
HR 5PK-1885	polyclinic		VAZ engines
HR AVX-10X875	Wedge	Moskvich 412	UMP engines
HR AVX- 10×940	Wedge	VAZ 2101-2107,2121, AZLK2141, IZH 2126	VAZ engines
HR AVX-10X1018	Wedge	GAZ 31029 doors 402
HR AVX-10х1030	Wedge	GAZ 31029 doors 402
HR AVX-10X710	Wedge	VAZ 2108-2115 1.3; 1.5	Carburetor
HZ 011 008		VAZ 2108-2115 8v	8 valve
HZ 011 010		VAZ 2110-2112 16v	16 valves
HZ 011 005

Scheme of accepted designations:

H- the first letter of the company name HANSE
R- the structure of HANSE numbers in the group of drive belts - V-belts and V-ribbed belts.
6RK-698- poly wedge with 6 ribs, effective length 698 mm.
AVX-10-875- wedge, width 10 mm, effective length 875 mm.
Z- structure of HANSE numbers in the drive group
belts - timing belts.

Russian-made cars
car model	Applicability	Year of issue
Cars
Niva Chevy	generator
VAZ 21082i	generator		21082-3701720-00
VAZ 2110-12i	generator
GAZ 3110 MS 16V w/o	generator without power steering
GAZ 3110 PS 16V	generator with power steering
VAZ 2108-099 1.3; 1.5	generator
AZLK 412	generator
VAZ 2101-07	generator
GAZ 2401, 2410	generator
GAZ 31029eng.402	generator
GAZ 3302, 3110eng.402	generator
Lada Kalina 1.8	generator
GAS with engine Chrysler	generator

V-belt 1200 A(A)

It is intended for drives of machine tools, industrial installations and agricultural machines.
The belt consists of a carrier layer based on chemical fiber materials (cord cord or cord fabric), a wrapping fabric layer and rubber layers vulcanized into one product. The carrier layer is located in the longitudinal direction of the belt. Fabric may be applied in the rubber layers.

Belt dimensions 1200 A(A)

Belt class (see specifications):

No. p / p	Class	Transmission work. power (million cycles)	Length with power transfer (%)	Profile	Operating time without power transfer (millions of cycles)	Elongation without power transfer (%)
				Z(O),A,V(B),
				C(B), D(D) E(D)
						1.8 - for machines and equipment 2.5 - for moving agricultural machines
				V(B), S(V), D(D)
				All profiles
				All profiles
				All profiles

Belts one section and one length complete in groups. A set is considered to be two or more belts intended for simultaneous operation in a multi-strand transmission. Belts of one set can be completed and packed in bundles with a certain number of multiplicity (by quantity).

Broadcast V-belts carried out by one or more belts. Pulley groove profiles for industrial installations must be made in accordance with GOST 20898-80, for stationary agricultural machines - according to the regulatory and technical documentation adopted in agricultural engineering.
Belts installed on the pulleys manually in a relaxed state, without the use of any tools.
The transmission pulley shafts must be parallel and the pulley grooves opposite each other. The misalignment of the axes of the pulleys should not exceed 1 mm per 100 mm of length. The axial displacement of the pulley grooves is allowed no more than 2 mm per 1 m of center distance and increases by more than 0.2 mm for every 100 mm of center distance over 1 m.
Pulley grooves must be kept clean and free of grease, solvents and other substances. They must not be painted over.
Belt tension must be checked and adjusted periodically during operation, especially during the first 48 hours of operation.
When transporting and storing machine tools, industrial plants and stationary agricultural machines, it is recommended to loosen the belt tension.
If one belt fails, it is recommended to remove the entire set. New belts must not be used with used belts.

Belts used, are selected in separate sets.