Iphone 6 as usb modem. Where did the iOS modem mode go and what to do with "contact Carrier"? How to use the feature on MacOS

Can be used as a modem iPhone, it meets certain system requirements and uses the carrier's cellular connection.

How to use iPhone as a modem

The first step is to make sure cellular data is turned on and you have Internet access.

Then open the settings and look for there.

It happens that this function is not prescribed as a separate item in the settings in some versions of IOS. Then it is necessary go to cell phone and find modem mode there.

If the required item is not there, then it is necessary set modem settings on one's own.
Select "cellular data network" and find the modem mode there. The same data (APN, username and password) are registered here as in the Internet settings. We reboot the phone and the modem mode appears in the settings as a separate item.

There are three ways to use your iPhone as a modem

Connecting via Wi-Fi

The easiest way. You need to enable tethering and set a password, which will be entered by the person who is about to connect to your device. We find the network by the name of the device and enter the password.

If you did everything right, then your phone will start distributing Wi-Fi, a person who knows the password will be able to access it and on the phone at the top of the screen you will see the number of connected devices.

Connecting via USB cable

In order to access the Internet from a PC using a USB cable, you need to connect the Iphone to the computer, it is best to do this using the original cable, other cables may make an incorrect connection, or not make it at all, then an inscription will appear on the phone screen that this accessory is not supported.
When you insert the cable into the computer, the phone screen will ask you "Trust this computer?", answer yes to establish the connection. Required in Windows 10, 8 and Windows 7 Apple iTunes must be installed(can be downloaded for free from the official website), otherwise the connection will not appear.

Then find your iPhone in network connections and connect, the password is set in the phone.

Connection via Bluetooth

If you want to use your phone as a Bluetooth modem, you first need to add a device (pair) in Windows. Bluetooth, of course, must be enabled on both the iPhone and the computer or laptop.
Right-click on the Bluetooth icon in the notification area and select "Add a Bluetooth Device".

Then pair up. A secret code will appear on the screen of the phone and computer, if it matches, you need to confirm, then the devices will connect via Bluetooth.

After the pair has been successfully created, you need to connect to the Internet through the Iphone hotspot. To do this, go to the “devices and printers” menu on the computer, find the Iphone we need there, right-click and connect.

The phone will display “Modem mode”, indicating that the connection is correct. To carry out these operations, you may need an up-to-date version of iTunes, if your version is outdated, then you need to reinstall it. During the distribution of the Internet, the phone remains connected and has the ability to receive SMS messages and incoming calls. When talking, the Internet connection is interrupted and automatically restored after it ends.

But at the same time, you need to remember two things: when working in modem mode, the device discharges much faster, so after you finish working, you need to turn off the "Modem Mode" function, and you distribute your mobile traffic, do not overdo it if you do not have unlimited Internet, certainly. Billing is carried out according to the amount of information downloaded and transferred, which will quickly bring your balance to zero.

Enjoy using.

For many mobile device users, an important feature is the so-called "tethering mode" (on English language it sounds like Personal Hotspot - "personal access point to the network." This is an option that allows the smartphone to share the Internet using Wi-Fi, which, in turn, is delivered via mobile network telecom operator.

In addition, the ability to create a Wi-Fi network allows you to connect two iPhones to each other in order to transfer files (although this can be done in other ways); and also in order to enjoy games that support multiplayer mode together.

In this article, we'll show you how to use this feature on the newest released iPhone - the sixth generation model.

How to activate hotspot mode on iPhone 6?

Let's start with general information - making your smartphone start distributing the Internet is very simple. Just go to "Settings", where the corresponding item will be available. It's called Modem Mode. On both, however, and on the other Apple technology running on iOS 8, this option is activated with one click.

After that, if you go to the options tab, you can see which will indicate the way to connect to your network. We will tell you a little further about how to fill them out.

Problem with iOS 8

Many users who have performed a firmware update on their device running on operating system 8th generation, a problem may arise - it is not known where the modem mode has disappeared. This happens on the iPhone 6 too - and often the person who needs to create a network with Internet distribution does not know what he needs to do to activate his modem. Someone might assume that this is a system failure. At the very least, the reviews of iPhone users on the forums indicate that people do not understand where the option has disappeared.

And indeed, from the outside, this may look like a problem - the menu item that was previously available, responsible for working as a modem, disappears from the settings. But we assure you, there is nothing to worry about. It is available on how to enable hotspot mode on iPhone 6 in this article.

Solution

So, after updating the firmware, the item really disappears from the settings - this is a fact. This happens for the reason that the configuration of the mobile access point to the network of your operator is lost. Information on this matter can be found in the same place - in the "Settings", in the section " cellular". After that, in order to set up the modem mode on the iPhone 6, you need to go to the “Cellular network data transfer” section, where you will see exactly what the problem was.

Below there is a window, which is called “Modem Mode”. It has APN, "Username" and "Password" columns. Remember: you filled out the same information in order to connect to the Internet in another settings window. That is, the developers of iOS 8 simply separated the Internet configuration for the phone as a whole and for the modem mode. This was apparently done to prevent unauthorized write-off traffic.

Here is the answer to the question: “Where is the modem mode on the iPhone 6?” It did not disappear anywhere - just the settings after the update need to be filled in again.

Data to fill

In order for readers who use the services of a particular operator to know what information needs to be entered to start working with the modem mode, we publish a general summary of data on the most popular operators.

• If you have MTS - in APN we specify internet.mts.ru, in the other two fields - mts.
• If Megafon - in APN - internet, and in the fields "username" and "password" - gdata.
• For those who have Beeline, you need to write in APN - internet.beeline.ru, in other fields - beeline.
• Finally, for Tele2 in APN we write internet.tele2.ru, while leaving other fields empty.

If everything is filled out correctly, the tethering mode on the iPhone 6 you are using will appear immediately. So you can distribute Mobile Internet to your friends who are nearby.

WiFi settings

Do not forget to also configure the Wi-Fi network that your device will create. The main thing for us is the name of the network and the access key to it (password). By default, the name sounds like "Your name" (which was specified when you first started the phone) with the prefix iPhone. According to it, those who will connect to the network will see that you are distributing it.

The second option that needs to be filled in is the network key. In other words, this is the password that those who want to connect to you will have to enter. Mandatory condition - at least 8 characters.

Data transfer

Since we explain how to share your Internet with other users in the instructions on how to enable hotspot mode on iPhone 6, we would also like to add a warning - some carriers disable the ability to share Internet on unlimited plans. This was done for the purpose of preventing excessive load to the network. True, the largest players in the communications market, such as MTS, Beeline, Megafon, are not affected by this.

There is another one here important point- keep track of what exactly those to whom you distribute the Internet are doing on the network. If, say, you have a few megabytes left on your account and you have entered modem mode, and your friend is watching videos, these megabytes will most likely run out soon, after which the traffic will be charged according to a completely different principle. Therefore, you risk not only spending extra money if you do not control the traffic consumption in your network in time.

Choice of tariff plan

Finally, if you constantly need to create a Wi-Fi network using your phone, you may need to take care of a suitable data plan. In order to support the work of several devices on the Internet, obviously, you need a tariff with a large amount of Internet traffic, and even better - even with "unlimited". Fortunately, today operators allow you to make a choice tariff plan depending on which services you would like to connect. And many providers even have separate traffic packages, you can order them “on top” of the services that you receive in the first place (minutes and SMS).

In the article, we answered whether there is a modem mode on the iPhone 6. It should be emphasized that this instruction is also relevant for other Apple devices based on iOS 8. In particular, the iPad of any generation has a similar difficulty with the fact that the mode settings constantly disappear after the update modem. There is nothing wrong with this, you already know how to act in order to distribute the Internet again.

Hello everyone, dear readers. Today I will tell you how to enable on your mobile device iPhone (any model: 4, 5, 6, etc.), the so-called “Tethering mode”. First of all, let's clarify what modem mode is and for what purposes we can use it.

Modem mode is a special mode in which your iPhone distributes cellular Internet (Internet from mobile operators) to other devices within the means wireless network WiFi.

You can connect any device to such a network, such as a tablet computer, iPad, laptop or other mobile phone. Very handy when wifi network urgently needed, but there is nothing suitable nearby.

So, now let's move on to specific steps to activate and configure this mode..

Activation

In order to successfully activate the modem mode, follow these steps:

Operator data

Below I will list some data of cellular operators for activating the modem mode. All these data must be entered in the settings of the "Cellular data network" item on your iPhone.

Important: in order for the Internet and the modem mode to work correctly, you must have an advising cellular tariff connected to your phone number that allows you to work with the Internet.

MTS

To configure, specify the following data: APN - internet.mts.ru, then the password and username are the same - mts.

TELE 2

The data is as follows: APN - tele2.ru, you do not need to fill in the login and password fields.

Megaphone

If you have this operator, then enter the following data: APN - internet, password and login are the same - gdata.

Beeline

If you have an operator data connected on your phone, then enter the following data: APN - internet.beeline.ru, login and password, as in previous cases, are the same - beeline.

I hope you managed to enable the required mode. That's all for me, if you have any questions regarding the topic being analyzed, then you can ask them in the comments to this post.

This mode allows you to use the device as a router. When turned on, your iPhone or iPad can serve as an Internet access point for other devices. It can also distribute Wi-Fi for other smartphones.

Some users are not aware of this feature or cannot find where it is enabled. This article will provide instructions for activating this option and show you how to connect other devices.

How to enable hotspot mode

To activate this function, the gadget must have data transfer active over the cellular network. If it is disabled, then you will not be able to connect the device in modem mode. Therefore, the user, first of all, must check the activity of this setting.

Here, a few lines below, you can activate the desired mode.

If the user has both WiFi and Bluetooth disabled, the device will offer to run them so that it becomes possible to use the phone not only as a USB modem. Here you can change the password if you plan to use your smartphone as a router for a wireless network.

How to use devices as a modem

USB connection

First of all, on the computer on which you plan to use such a modem, you will need install Apple iTunes. The utility should be downloaded from the official page. If it is not installed, then the connection will not be established, the desired icon simply will not appear. After the program is downloaded and installed, you need to connect your iPhone to your computer using a proprietary cable.

When connecting for the first time, the smartphone will ask if the user trusts this computer. You must answer in the affirmative, otherwise you will not be able to use the phone as a modem.

After a short amount of time, a new one will appear in the lists of network connections, with the name " Apple Mobile Device Ethernet". Right after that global network on the device should work. You can also check and change properties in the list of network connections.

How to share WiFi from iPhone

If Wi-Fi is active at the time the mode is turned on, then the smartphone can be used as a distribution point for a wireless network. The network will be called iphone username. Other devices will only need to connect to it and enter a password randomly generated or provided by themselves.

After connecting, it will be possible to work on other devices in the same way as with regular wifi.

Tethering mode over Bluetooth

To use this type of connection, you first need to establish a connection between smartphone and laptop. You can do this in several ways: you can use devices and printers, you can click on the desired icon in the notification panel.

Next, you will need to connect these two devices. After that, on the iPhone you will need confirm connection and press " Create a couple". A window will appear on the PC that will inform you about the match of the secret code, it also needs to be confirmed. Next again you need go to network connections and click on the specified line.

It remains only to connect through a delicate device.

After that, the Internet on the computer should work.

How to use the feature on MacOS

Additional settings are required only for bluetooth. You should go to Bluetooth Pan and find your device there. After pairing, the Internet will appear on the PC. For WiFi, the sequence of actions is no different from that described in the previous part of the article. When connected via USB, everything will be configured automatically. If this does not happen, you need to go to " USB to iPhone' and uncheck the option ' Disable if you don't need it».