Polymer clay is a kind of unique material that allows you to create products of amazing beauty and subtlety. From this material, you can create small sculptures, jewelry, decorative elements for mirrors and vases. It is also used to make original bouquets for brides and flowers for decorating interiors.
Photo of flowers from polymer clay amaze the imagination and create the impression that only experienced professionals can handle such products. However, with the right approach and knowledge of some tricks of working with the material, you can create delicate, beautiful flowers on your own.
Material
So what is polymer clay? In needlework stores, it can also be found under such names as plastic or cold ceramics. Polymer clay is a plastic material consisting of a polymer such as polyvinyl chloride.
Thanks to the properties different types of this polymer, plastic is divided into 2 types: baked and self-hardening. The first type of plastic requires heat treatment at a temperature of 100-130 ̊ C. Self-hardening clay does not require heat treatment and hardens at room temperature.
Also, such clay is divided into 3 more types: heavy and light plastic, as well as cold porcelain.
Heavy plastic after drying resembles natural clay and is used only for the manufacture of massive products.
Lightweight clay rolls well into thin layers and has a delicate texture, which allows it to be used for finer work.
Cold porcelain was specially created for making artificial flowers. Plants from this type of plastic have a very natural appearance due to the consistency of the material, its plasticity and flexibility.
Before buying polymer clay, you need to clearly define what products the material will be used for. After that, study the pack of the selected plastic - it will contain instructions with a description of the work for beginners. It will help you understand which plastic is in front of you - baked or self-hardening.
Before buying, be sure to check the shelf life of the plastic and the integrity of the packaging. Material with an expired shelf life or damaged packaging quickly loses its elasticity and becomes unusable.
Safety
Each master class on polymer clay colors should begin with a study of safety precautions when working with this material.
Despite the claims of manufacturers about the safety of polymer clay, it contains phthalates, which can adversely affect human health if the material is handled carelessly and carelessly. It is best to work with polymer clay with thin latex gloves. When working with plastic, it is undesirable to eat or smoke.
If you bake polymer clay in a home oven, then after polymerizing the products, you need to clean it well. It is best to put a deep dish filled with water and set the temperature in the oven to a maximum of 10-15 minutes, then turn off the gas and leave the door open for 20-30 minutes.
Be careful not to exceed the baking temperature of the material. If the polymer clay is still burned out, you need to turn off the gas, open the windows and leave the kitchen until it is completely ventilated.
Tools
To properly make a flower from polymer clay, you need to be able to use tools in your arsenal, without which working with it will be difficult or completely impossible.
First you need to take care of organizing a flat surface for modeling. It is best to use a flat plastic board or tile. It is strictly forbidden to use food cutting boards if they are expected to come into contact with food again.
For cutting various elements from polymer clay and dividing it into parts, you must purchase a scalpel or stationery knife The ideal choice would be to purchase a special construction knife with interchangeable blades of different sizes and shapes.
To roll polymer clay into thin layers, you need to use a rolling pin. A clear acrylic rolling pin is best.
To make drawings on polymer clay and give petals and leaves made of artificial material a natural relief, a set of stacks is needed. You can also use special stamps and texture sheets for this purpose.
Also take care of buying cling film - under the influence of air, polymer clay loses its plasticity in 10 minutes, after which it becomes unsuitable for work.
flower making
To quickly learn how to sculpt flowers yourself, you need to start with simple jobs to understand the basics of working with such capricious material.
For beginners, it is best to start learning how to make simple flowers such as kalas. To make this flower, you need to take clay of two matching colors, latex gloves, a clerical knife and stacks. Instead of stacks, you can use simple toothpicks.
Roll both pieces of plastic into long sausages and wrap one of them around the other. After that, roll up the clay and one ball. Divide it into 2 balls again, and then into 2 sausages. Tear them into 3-5 pieces, and roll into 1 ball. This will help you achieve the marbling effect.
Using a stack, pierce a hole in the base of the funnel - insert a pestle made of metal wire and beads into it.
For more complex flowers, the petals must be cut with a knife separately. To give the flowers a more natural look, you can give them structure with the help of molds or stacks.
You can also use acrylic paints for tinting plastics. beautiful ideas for flowers and their manufacture can be gleaned from sites dedicated to the manufacture of such products.
Photo of polymer clay flowers
Polymer clay - unique material, with which you can create amazing sculptures, jewelry, crafts and bouquets. It was invented in Germany in the 1930s to make dolls, but later in the 1960s clay became widespread and was used to make dolls. all kinds of things.
Very popular polymer clay products are flowers and flower bouquets. To learn how to sculpt flowers, it is not necessary to be a sculptor or have artistic super powers. It is enough to have good taste, know the basics of modeling, be patient and train a lot.
There are several types of clay: self-hardening and fireable. for flowers and flower arrangements usually the first one is fine. After manufacturing, after a certain time, the product will harden itself. Fired clay is usually used for products that must be very strong, for example, for jewelry.
1) Polymer clay for beginner flowers. Cala from polymer clay
These simple kala flowers are very easy to make and only take a few minutes to make. In this case, the flower is adorned with beads and attached to a hook, so the earrings are very simple but cute.
What you will need:
- Clay of two colors
- Rubber gloves
- Toothpick
- Knife
- Beads and hook-earrings
Let's get to work:
Take two small pieces of polymer clay in different colors that go well with each other. You will need two colors in order to get a "marble pattern". You can practice on clay of the same color first.
Roll each of the pieces into long sausages.
Wrap one around the other.
Then roll into a ball.
Do this process again from the beginning. This is necessary to obtain a marble effect. Wrap one sausage around the other, and then tear it into several pieces. After that, roll into a ball, as shown in the photo:
Divide the ball into two equal parts with a sharp knife.
Then start sculpting flowers. Fashion a flat round plate, slightly lengthen the edge. Pinch the edge with your fingers, carefully wrap the other edge as you fold paper bags to get a funnel.
Straighten the edges of the flower so that the bud opens up. Use a toothpick to make a hole in order to insert the beads and earring.
The blank for the future earring is ready. Insert accessories and beads.
2) Sculpting flowers from polymer clay. Lily from polymer clay
With this flower you will have to tinker a little, but if you understand the principle, everything will turn out quite simply. This tutorial shows how to do very tiny lily, but you can use it to make flowers of any size.
What you will need:
- One color clay
- Glass rolling pin or bottle
- Knife or scissors
- Needle or awl
- Watercolor paints and a brush
- Paperclip
Let's get to work:
Take a small piece of clay, it is better if it is white or beige clay - the colors of fresh flowers, but you can use any color you like.
Roll out the clay into a thin sheet using a rolling pin. The thickness of the sheet in this example is 3-4 times the thickness of a normal sheet of paper. Make sure that the sheet is not too thin, as it will be difficult to work with.
Using a needle or awl, outline the shape of the petals - a total of 6 pieces, of which three are slightly larger and three are smaller. Smaller petals will be attached closer to the stamens in the product.
Then, using a thin needle, apply a ribbing to each petal. Although natural lilies do not have this texture, polymer flower she will look very nice.
You should end up with petals like this:
In lilies, the central part of the petals is usually colored yellow, and there are also brown "freckles". These details can be applied to the petals with watercolors and a brush.
Now you should work on the inside of the flower, or rather its stamens and pistil, which are cut with a knife from the same flat sheet of clay. Make the pestle a little thicker and paint its tip with brown paint.
Using an awl, bend the edges of the small petals inward. Prepare a paperclip with a straightened end. A flower will be attached to it.
Let's start collecting a flower:
3) Polymer clay for flowers. Rose from polymer clay
Roses are the most popular flowers made from polymer clay. Usually they are made from many individual petals that need to be prepared in advance.
Option 1 (simple)
What you will need:
- One color clay
-Rubber gloves
Let's get to work:
Roll up a sausage from a piece of clay, and then divide it into many parts - future petals. Form petals of different sizes, as shown in the photo.
Fold the smallest petal so that you get the middle of the flower, and then attach the rest of the petals to it in turn, starting from the smallest to the largest.
The simplest rose is ready. It can be used for jewelry if you attach accessories to it.
Option 2 (hard)
If you are already a little familiar with a material like polymer clay, you will most likely want to learn how to make more complex products. To do this, you will need additional materials and forms, which can be purchased at specialized stores or on the Internet.
Try making a more realistic rose using these tools.
What you will need:
- Clay of two colors
- Rubber gloves
- Board for work
- rolling pin
- Forms for cutting (for petals in the form of a flower)
- Rose petal mold (optional)
- Cup mold (optional)
- Glue for clay with a brush
- Knife
- Green tape for stems
Let's get to work:
Take a flower wire about 20 centimeters long and bend one end of it to get a hook. This is the future rose stem. Roll a ball from a piece of clay, and then give it the shape of a drop.
Insert the wire into the base of the drop. If you have a ready-made flower mold, you can compare the drop with the size of the petals. They need to be a little bigger to wrap it around. This is the base of your bud. The color of the clay for the drop can be any, it will not be visible under the petals.
Roll out the clay into a thin sheet and use a cookie cutter to cut out a five-pointed flower. If you do not have such a shape, make it out of cardboard and cut out the flower with a knife. Cut off 2 petals. Then with a stack with a ball on the end, process the edges of the petals so that they become thinner. Also use mold for the petals.
Coat the base of the bud with glue and start wrapping the petals around it to form a closed rose bud.
Take two more petals, coat them with glue where they will be in contact with the bud, and wrap them around the bud again, not so tight.
Now prepare the triple petals. Wrap them around the bud as shown in the photo. Don't forget to grease them with glue. The more petals you have, the more magnificent the rose will turn out. In this case, three more triple petals were used.
After that, use the full 5 petals. Turn the bud over and press the base of the flower.
Repeat the procedure with another five-pointed flower. You should end up with a rose like this:
But that's not all. To make the flower look just like the real one, attach 5 more lower petals to it, each of which will be attached to the wire. Fasten all the stems with ribbon or tape, wrapping them around a bundle of wire.
To make a flower cup, take a piece of green clay. Make a cup shape and roll out the edges with a thin rolling pin. Using a mold or a knife, cut out a five-pointed star. For realism, process the edges with a knife.
Glue the inside of the bowl with glue and glue it to the base of the flower, making a hole with the stem wire. Wrap the stem with green tape.
4) Sculpting flowers from polymer clay. Polymer clay orchid
Orchid phaselis ("butterfly") is a popular flower that is molded from polymer clay using molds. Molds are needed to create a realistic texture of the petals. if you do not have them, you can also work, but the petals will turn out smooth, without veins and bumps.
What you will need:
- Clay
- Rubber gloves
- Board for work
- rolling pin
- Wire for artificial flowers
- Forms for cutting (for the core)
- Mold for petals
- Stack with round tip
In the 30s in Germany, they invented a chic material for creating extraordinary products - polymer clay. At first, dolls were made with it, but in the 60s it rapidly gained popularity, after which clay began to be used to create various sculptures and compositions.
Now original jewelry, souvenirs, flowers are created from this material. Wedding bouquets are excellently obtained from polymer clay, so clay has become an indispensable material for wedding celebrations.
You, too, can learn how to make chic crafts from this wonderful material. In order to create your first masterpiece, it will be enough for you to familiarize yourself with the material below.
Polymer Clay Sculpting Tools
- Surface for work. You can take a flat and perfectly flat board made of glass or plastic, tiles or ceramics.
- Knife. Suitable for both stationery and construction. Have spare blades on hand.
- Acrylic rolling pin - very handy when rolling clay.
- A syringe and various nozzles with which you can make a variety of stripes, floral elements.
- Forms for cutting figures (cutters).
- Stacks.
- Polymer clay.
- Lacquer for polymers.
- Brushes of different sizes.
- Toothpicks.
- Napkins.
- Fittings.
Before starting work, the clay must be well kneaded.
Useful tips for working with clay
- First, wash your hands well, as clay perfectly absorbs various contaminants. Keep your work area clean too. Gather your hair or put a scarf on your head. Apply talcum powder to the clay - this way you will prevent debris from sticking to it. Calculate the amount of clay correctly, because colored clay has a short shelf life. When the clay dries out, do not lose heart, but simply add regular cream to the material for hands, but not much. Be careful with clay products - they are quite fragile. Keep the packaging with the material only when closed. To make the clay serve you for a long time, put a damp cloth there.
If you do not have the opportunity to purchase ready-made clay in the store, then below is the recipe homemade of this material.
You will need: baby oil, flour (1 teaspoon), plain white glue (1 teaspoon), cornstarch (1 teaspoon).
Combine starch, glue, add flour. Stir until the mixture looks like clay. Next, drip five or six drops of oil so that the clay does not stick to your hands. To make colored clay, take some of this material in your hand, drip some acrylic paint and knead it in your hand.
Polymer clay flowersCalla
For those who are just starting out with polymer clay, calla lilies are the easiest to make. This is a very simple craft and can be done in minutes. And if you decorate the resulting flower with beads and thread a special hook into them, you will get chic earrings.
Take a couple of clay flowers, a toothpick, a utility knife, rubber gloves and beads.
Make sausages from clay pieces, then roll them one around the other. Roll the resulting product into a ball. Do these manipulations until you get a marble color. After that, using a knife, cut the ball into two equal parts.
Make a rounded flat plate and stretch its edge a little, which is pinned with your fingers. Carefully fold the opposite edge (like a paper bag).
Straighten the edges, correct. You should get a drop-down bud. Make small holes with a toothpick and insert an earring and beads into the flower.
Lily is more difficult to make than calla lilies, but the result is worth it!
Take the clay of the color you like, a bottle or a rolling pin, an awl or a large needle, a knife, paints (preferably watercolor), brushes, paper clips.
Put gloves on your hands, take a piece of clay, roll it thinly, outline the petals. Draw the borders of the petals with a needle. You should have three large and three small petals. Small petals will be in the center of the flower.
Cut out the resulting petals with a knife or scissors. Draw veins on the petals - it looks very beautiful.
Let the resulting components dry, and you yourself will be engaged in the manufacture of the center of the flower, namely the pistil and stamens. Roll out the clay and cut into thin strips. Make the strip for the pestle wider, apply brown color to its tip. With a needle, twist the edges of the petals, which are smaller. Straighten a paper clip and fasten the flower to it, starting with the pistil and stamens. Next, symmetrically attach the petals.
Roses are considered the most sought after flowers, even if they are made from polymer clay. To make this beauty, take polymer clay, put gloves on your hands.
Make a sausage out of a piece of clay, cut it into pieces, from which make balls of various diameters. Nine balls will be enough if the rose is small.
From the balls blind oval petals. To do this, we put a ball on the left palm, on which we press with the thumb of the right hand. We form a petal. We make the edges of the petal thinner, and the base denser. We do this with all the balls. After that, we collect the rose. Make the middle of the flower - twist one petal into a roll. Next, attach the petals to the center from smallest to largest. Make sure that each petal covers the middle of the previous one.
Rose done. It is perfect for decorating various accessories. Would look great as a fridge magnet.
In the 30s in Germany, they invented a chic material for creating extraordinary products - polymer clay. At first, dolls were made with it, but in the 60s it rapidly gained popularity, after which clay began to be used to create various sculptures and compositions.
Now original jewelry, souvenirs, flowers are created from this material. Wedding bouquets are excellently obtained from polymer clay, so clay has become an indispensable material for wedding celebrations.
You, too, can learn how to make chic crafts from this wonderful material. In order to create your first masterpiece, it will be enough for you to familiarize yourself with the material below.
Polymer Clay Sculpting Tools
- Surface for work. You can take a flat and perfectly flat board made of glass or plastic, tiles or ceramics.
- Knife. Suitable for both stationery and construction. Have spare blades on hand.
- Acrylic rolling pin - very handy when rolling clay.
- A syringe and various nozzles with which you can make a variety of stripes, floral elements.
- Forms for cutting figures (cutters).
- Stacks.
- Polymer clay.
- Lacquer for polymers.
- Brushes of different sizes.
- Toothpicks.
- Napkins.
- Fittings.
Before starting work, the clay must be well kneaded.
- First, wash your hands well, as clay perfectly absorbs various contaminants. Keep your work area clean too. Gather your hair or put a scarf on your head.
- Coat the clay with talcum powder to prevent debris from sticking to it.
- Correctly calculate the amount of clay, because colored clay has a short shelf life.
- When the clay dries out, do not lose heart, but simply add ordinary hand cream to the material, but not much.
- Be careful with clay products - they are quite fragile.
- Keep packaging with material only when closed. To make the clay serve you for a long time, put a damp cloth there.
polymer clay at home
If you do not have the opportunity to purchase ready-made clay in the store, then below is a recipe for home-made clay.
You will need: baby oil, flour (1 teaspoon), plain white glue (1 teaspoon), cornstarch (1 teaspoon).
Combine starch, glue, add flour. Stir until the mixture looks like clay. Next, drip five or six drops of oil so that the clay does not stick to your hands. To make colored clay, take some of this material in your hand, drip some acrylic paint and knead it in your hand.
Polymer clay flowers
callas
For those who are just starting out with polymer clay, calla lilies are the easiest to make. This is a very simple craft and can be done in minutes. And if you decorate the resulting flower with beads and thread a special hook into them, you will get chic earrings.
Take a couple of clay flowers, a toothpick, a utility knife, rubber gloves and beads.
Make sausages from clay pieces, then roll them one around the other. Roll the resulting product into a ball. Do these manipulations until you get a marble color. After that, using a knife, cut the ball into two equal parts.
Make a rounded flat plate and stretch its edge a little, which is pinned with your fingers. Carefully fold the opposite edge (like a paper bag).
Straighten the edges, correct. You should get a drop-down bud. Make small holes with a toothpick and insert an earring and beads into the flower.
Lily
Lily is more difficult to make than calla lilies, but the result is worth it!
Take the clay of the color you like, a bottle or a rolling pin, an awl or a large needle, a knife, paints (preferably watercolor), brushes, paper clips.
Put gloves on your hands, take a piece of clay, roll it thinly, outline the petals. Draw the borders of the petals with a needle. You should have three large and three small petals. Small petals will be in the center of the flower.
Cut out the resulting petals with a knife or scissors. Draw veins on the petals - it looks very beautiful.
Let the resulting components dry, and you yourself will be engaged in the manufacture of the center of the flower, namely the pistil and stamens. Roll out the clay and cut into thin strips. Make the strip for the pestle wider, apply brown color to its tip. With a needle, twist the edges of the petals, which are smaller. Straighten a paper clip and fasten the flower to it, starting with the pistil and stamens. Next, symmetrically attach the petals.
Rose
Roses are considered the most sought after flowers, even if they are made from polymer clay. To make this beauty, take polymer clay, put gloves on your hands.
Make a sausage out of a piece of clay, cut it into pieces, from which make balls of various diameters. Nine balls will be enough if the rose is small.
From the balls blind oval petals. To do this, we put a ball on the left palm, on which we press with the thumb of the right hand. We form a petal. We make the edges of the petal thinner, and the base denser. We do this with all the balls. After that, we collect the rose. Make the middle of the flower - twist one petal into a roll. Next, attach the petals to the center from smallest to largest. Make sure that each petal covers the middle of the previous one.
Rose done. It is perfect for decorating various accessories. Would look great as a fridge magnet.
Orchid
After you have practiced making a rose and callas, you can start making exquisite flower- orchids. To work, take clay, a flat board, gloves, a rolling pin, wire, a special cutting mold, a knife, brushes, paints, molds, a stick with a rounded tip.
Use a stick to color a piece of clay, and make a small ledge in the middle. Cut out a cross with a cookie cutter - this will be the middle of the flower. If there is no form, then draw the core yourself. We take the resulting part in our hands and bend its upper tip inward. With the help of a stick, we bend the rest of the blanks in the same way.
We take the wire, bend it in the form of a right angle. On the tip of the wire we put on the middle of the flower, smeared with glue. Blind the middle part of the flower sponge from a small piece of clay. To do this, make a grain out of it and cut it a little with a knife. Put it on a wire in the middle of the sponge. Decorate the flower lip.
After that we make petals. We roll out a colored clay piece, which is with a ledge. We put the workpiece on the mold, cut off the excess. We attach the wire to the base. In the same way, we make five more petals. Draw dots on all petals. Take all the petals, lip, connect. It turned out to be a beautiful orchid!
Crafts made with polymer clay are gaining popularity every day, a type of ceramic floristry is developing. They sell well and are highly valued.
It should be noted that modeling from this type of material is in demand not only among needlewomen. Children are more and more interested in this kind of art. This activity is very exciting, with the help of it your child will actively develop and relax. Children with great pleasure will help you make crafts and decorations.
Learn how to create masterpieces from polymer clay, and you will discover new world art, with which you can create chic jewelry and even have additional income from your work!
117 photos of color examples
Such a hairpin, with a delicate peony, lilac flowers and blackberries made of polymer clay, will become an actual decoration for a summer hairstyle. The hairpin is quite light, despite its voluminous appearance, so the hair will not noticeably weigh down - its comfortable wearing is guaranteed by a successful base, and the decor itself will definitely not interfere. Such beautiful polymer clay flowers according to our master class can be made by anyone, even a beginner needlewoman, including those who have not yet dealt with polymer clay.
To create flowers from polymer clay according to this master class, you will need:
polymer clay peach, pink, green, light green, white, black, maroon, lilac, yellow;
acrylic paint green and brown;
art pastel crimson and orange;
wire 0.8mm;
wire 1mm;
green teip tape;
quick-drying glue;
metal hairpin-clip 12cm;
rolling pin for polymer clay;
mock knife;
thin knife for polymer clay;
pliers;
tassel;
mold with petal texture universal;
mold with raspberry leaf texture;
mold with peony leaf texture;
Flowers from polymer clay: a detailed master class with a photo
Peony flower from polymer clay: master class
Knead the peach-colored polymer clay and roll it into a 1 mm thick layer. Cut it into strips 2 cm wide. Cut narrow triangles along the edge of the strips so that deep notches form on the strip.
Take a wire 1 mm thick and cut a piece 5 cm long from it. Since we will have one peony and one closed bud, we will need two such segments. Form balls with a diameter of 1.5 cm from the foil. Bend the ends of the wire segments with pliers, grease with glue and put foil balls on them.
Stick fluffy peach-colored bundles to the bottom of the foil ball on the wire, and lift the ends up so that the foil is not visible. In this way, make several rows of these beams.
Now we sculpt the petals for the pink flower. To do this, roll out pink polymer clay into a layer 2 mm thick and cut out peony petals with slightly wavy edges from it with a breadboard knife. The length of the petals is about 1.5-2 cm. The number of petals depends on how lush the peony is. I needed about 15 petals.
Take the petal and press down on the edges with your fingers to make it thinner. Moisten the mold with the texture of a peony or rose petal with water, put a petal on it and press down. In this way, process all the petals.
Place the peony petals on a sponge or a special rug and process their middle with a round dowel so that they become concave.
Stick the petals to the underside of the fluffy core of the peony in several rows.
And to make a polymer clay peony bud, take a wire with a foil ball and wrap a few petals around the ball itself.
Raspberry-colored pastel scrape with a knife and apply it with a brush on the underside of the bud and peony. Pay attention to how the opened peony is located. It must be in a vertical position. I put a square of cardboard on the peony wire so that the cardboard supports the peony petals from below. And I clamped the wire with the peony with a wooden clothespin. In this position, it can then be baked.
Polymer clay lilac: master class
To make lilac flowers, form droplets 1 cm long from lilac clay. Cut the wide end of the drop with a blade or thin knife crosswise into four parts.
Insert a narrow stack into the center of the notch and roll each of the parts on your finger with a stack to make a flower with four thin petals.
Cut a wire 0.8 mm thick into segments 4 cm long. Bend small loops at the ends of the segments with pliers. The number of segments should be the same as the number of flowers you need. In this case, there will be 13 pieces. Roll up thin flagella 0.5 cm long from yellow polymer clay, fold them into bunches of 3 pieces. Stick one bundle to the loops at the ends of the wire segments.
Take a polymer clay lilac flower, make a through hole in it with a toothpick and put the flower through the hole on a piece of wire with yellow stamens. When the stamens are in the center of the flower and the wire is not visible, lightly press down on the bottom of the flower and roll it between your fingers so that it sticks to the wire. Similarly, put on the wire with stamens all the other flowers.
Blackberries (or raspberries) from polymer clay
Now let's start sculpting blackberries. To do this, prepare 5 more pieces of wire 5 cm long, bend the loops at the ends. On the loop of each segment, put on an egg-shaped lump of black polymer clay with a diameter of 0.7-0.5 cm.
Roll a lot of balls with a diameter of about 3 mm from black and maroon polymer clay.
Now wrap these balls around the lumps on the wire, use black and burgundy balls mixed to make the blackberry look more natural. When the berries are harvested, use a plastic knife to make a small vertical groove on each bud. Insert the wire bases of the berries into a hemisphere of crumpled foil and bake them together with the peony and bud in the oven for 10 minutes at the temperature indicated on the clay package.
Leaves for polymer clay flowers
For the leaves you need to prepare the stems. To do this, cut a wire 1 mm thick into 10-12 segments 6-7 cm long. Put a ball of green clay on the segment and stretch it evenly along the wire so that half of it is covered with a layer of green clay. Prepare 4 more stems in the same way. Cover the remaining segments with light green clay.
Roll out light green clay into a layer 2 mm thick and cut out 5-7 blackberry leaves 2 to 3 cm long from it. Cut small notches along the edges of the leaves with a knife or other suitable tool.
Using a mold with a raspberry leaf texture, print the veins on the leaves.
Cut out peony leaves from green clay and also make veins on them with a suitable mold.
Take one leaf of a peony and attach to it the end of a wire covered with green clay; its end should reach approximately to the middle of the vertical vein of the leaf. Now pinch the leaf from the bottom so that the leaf is fixed on the stem. In this way, stick all the peony leaves to the stems, and stick the blackberry leaves to the light green stems. Put the finished leaves on cotton wool rollers.
To make peony sepals, roll the green clay thinly and cut the sepals to the appropriate size with a knife. Apply orange pastel to the ends of the sepals.
Place the sepals on the sponge with the tinted side down and work them with a dowel.
For blackberry sepals, mix light green clay with a piece of white clay, roll it thinly and cut a strip 1 cm wide from it. Cut the strip into narrow triangles with a knife.
Cover the stems of the berries with the same clay from which the sepals were cut out for them. Then stick 5 triangles to the berries near the base of the stem, bend the ends of the triangles up. Stems in some places can be tinted with orange pastel.
Now insert the polymer clay blackberry into the crumpled foil, stick the sepals to the pre-baked peonies and place the bud on the foil, and place the opened peony on the cotton wool. Bake the peony flowers, berries, lilac flowers and leaves according to the clay instructions.
After baking, cover the raspberry leaves with green or dark green acrylic paint, and when the paint dries a little, wipe it off wet wipe: this way the paint will remain only in the recesses of the veins.
Tint the ends of the raspberry leaves with brown paint.
Assembling hairpins from flowers and berries from polymer clay
Collect lilac flowers in bunches of several pieces and connect them together with teip tape.
Now you need to collect the bouquet. To do this, take a small leaf of raspberry, wrap another leaf to it, then wrap a sprig of lilac, a couple of blackberries. And so wrap the leaves, berries and flowers with tape tape in the desired order to get such a composition as you like. Cut off the excess wire at the end of the composition with wire cutters and wrap the cut with teip tape. Fix the end of the tape with glue.
Prepare 2 pieces of wire 0.8 mm, 8 cm long. Attach your composition to the hair clip and wire it to the upper half of the hair clip in two places - at the beginning and end of the branch. Cut off the excess wire; bend the ends inward, under the leaves. Then wrap the places where the composition is attached to the hairpin with a narrow strip of teip tape. And in the place where the composition is in contact with the hairpin, drip a few drops of liquid quick-drying glue and wait for it to dry completely.
A hairpin with polymer clay flowers (peonies and lilacs) and blackberries is ready! Summer is coming - let's get ready for it in advance!
Ekaterina Starkova (Luna) specially for the site
Restoring out-of-focus and blurry images About sharpening techniques and tools
Automatic settings
Automatic Internet settings "Megaphone": description, receipt, application
Iota catches badly: no network - what to do
How to set up internet on your phone?