Most urban residents use a high-speed cable connection to access the Internet, to which a PC or smartphone is connected via a router. However, there are cases when, on the contrary, it is necessary to access the Internet through android smartphone. Such a need often arises among residents of the outback, where there is no high-speed connection, but there is 3G. It is also sometimes necessary to use an Android smartphone as a modem when traveling, on business trips, etc.
How to access the Internet through mobile device- the article will tell. In any case, before creating an Internet connection, you need to enable the mobile hotspot on your smartphone. This is usually done with one click in the "shutter" of the Android OS.
Option 1: Internet via Wi-Fi hotspot
Most modern smartphones support the creation of a wireless access point by regular means. This functionality has been added to android versions 2.3. To distribute the Internet via Wi-Fi, you must perform the following steps:
After that, you can access the Internet from any supporting device to the access point created on your Android smartphone. WiFi devices. In the case of Samsung smartphones it looks like this: 
Option 2: USB cable connection
If you need to connect the Internet through an Android smartphone on a stationary PC that is not equipped with wireless modules, you need to use a USB cable. To establish a connection, you need:
- Connect the device to the PC via cable.
- Open the settings menu.
- Find an access point point, similar to that indicated in the previous method.
- Select and activate the USB modem item.
Computers based on Windows 7 and later will detect the device and establish an Internet connection in a few seconds. On Windows XP, you may need to install drivers to correctly detect your phone. With a Mac, things are more complicated. You need to open the network settings and ask the operator for the password and that's it. necessary settings, which will be reflected in the fields when configuring the network. Use an assistant and he will tell you what to do. 
It is much easier to use a smartphone via Wi-Fi or as a Bluetooth tethering.
Option 3: Bluetooth tethering
The third way to connect the Internet on a computer through an Android smartphone is to use a Bluetooth modem. It is not always suitable, since the presence of the corresponding module in the computer is required. The speed of the Internet connection will be lower than via Wi-Fi, but this method has one important advantage - cost-effectiveness. A device that actively transmits data via BT will work on a single charge up to 2 times longer than when transmitting data via Wi-Fi. To connect to the Internet, follow these steps:
In the case of MAC, everything is also intuitively simple. Click on the connection icon in the top panel (similar to the Wi-Fi icon) > then open the network settings at the very bottom and connect the device via Bluetooth there, as shown in the screenshot below. 
You will also like:
What is FLAC, its features and differences
How to choose a protective glass for your smartphone
Sometimes the user is faced with the task of distributing the Internet from his computer to a mobile device, a tablet or smartphone based on the Android OS. What is so difficult about this? - you will probably ask a question, you just need to connect to a Wi-Fi wireless network and that's it. And if there is no wifi router itself, and this must be done via a USB cable. Here at such task also there are difficulties, but it is quite solvable.
How to connect Android to the Internet through a computer using a USB cable
If a wifi router is not nearby, and the speed of EDGE or 3G does not suit you, then you just need to connect Android to your computer, and so let's get started.
What we need for this:
1. Computer with high speed internet and Windows OS;
2. Android device (smartphone or tablet);
3. USB connection cable;
4. A special Android Debug Bridge program (highly desirable).
How to distribute the Internet from a computer to Android
Before starting the whole procedure, you need to activate an additional option in your Windows network settings, for this you need to go to network connections and check the box "Allow other network users to use this computer's Internet connection".
1. Download and unzip, it is the link between the Android device and the PC;
2. Activate the mode on Android, as we wrote earlier;
3. Connect your smartphone or tablet via USB cable to PC;
4. In the folder where you unzipped the program, find and open the AndroidTool.exe file;
5. In the window that appears, click "Refresh" (1), then from the Select DNS to use list (2), select DNS and click the Connect button (3).
6. You will see a window with a scrolling connection line (see the picture on the right);
7. If Everything went right, you will see an inscription in the “Connection Done” window, and the PC will distribute the Internet to an Android smartphone or tablet;
8. Sometimes a window may appear on a smartphone or tablet asking you to provide rights for the user, click "Allow".
That's all, now your computer distributes the Internet to Android via USB, you can safely use it.
Articles and Lifehacks
This manual will tell you how to use the Internet from your phone to your computer via USB - using a data cable and the corresponding settings on your phone and on your computer.
Windows 7 will be used as the base operating system, the settings of which can be easily adapted to both earlier and older versions.
Configuring mobile device settings
- First you need to set a certain configuration for your mobile device;
- You need to go to the settings section and there to the wireless networks section, enter the "Modem Mode" and check the "USB" item;
- Next, turn off the working network screens and connect the mobile Internet.
Data cable and drivers
Now we connect the data cable to the mini USB port of the mobile phone and to the USB socket of the computer.In this case, in most cases, the necessary driver programs will have to be installed independently. Otherwise, they will need to be installed manually.
If everything connected successfully and correctly, the screen will display a notification.
PC settings configuration
Next, you need to configure the PC settings:- To do this, go to the "Control Panel" (Start menu) and set its view to the "Large Icons" mode;
- Then make an entrance to the "Modems and Phones" section, where a requirement may appear with a specification of the geographical location (here you can write anything and press confirmation);
- After that, the required directory "Modems and Phones" will become available, from which the transition to the tab with modems is made;
- Here it is necessary to find in the proposed list the model of the mobile device used, which in this case acts as a modulation / demodulation unit, and by activating it go through the "Properties" section;
- In the directory that appears, go to the section of additional communication parameters and enter the following code in the initialization line there: AT+CGDCONT=1,"IP","internet";
- Now you need to close all open windows (OK) through confirmation, except for the main setup window, in which you should go to the "Control Center public access”, and from there to the “Settings for a new network connection” by selecting the connection settings item via phone;
- Then click "Next" and select the desired modem from the proposed list, after which a form for entering data will open;
- Here you do not need to specify the password and username, but only the name of the operator used, as the connection name, and the phone number;
- Now you only need to activate the connection with confirmation and, after it is successfully established, you can click on the browse network button, after which the default browser with the active Internet should open.
On each individual phone, there may be software differences in the menu from those indicated in this manual, but all of them will be with an intuitive similarity.
If more than one SIM card is used on the connected phone, then the Internet connection will come from the card of the first value.
APN in the settings must be specified correctly, and the tariff must allow connection to the network.
Mobile Internet is still quite expensive and slow way to connect to world wide web. Therefore, using it as the main Internet connection for a desktop computer is rather inconvenient.
However, there are times when there is simply no other option. For example, during a trip on vacation or a breakdown of the main Internet provider. In such cases, you have to resort to using the mobile Internet. In this article, we will talk about how to connect a computer to the Internet via mobile phone.
by the most in a simple way connecting a computer to the Internet via a mobile phone is to use the "Hotspot" function. This feature is found in most modern smartphones.
After turning on the Hotspot function, your mobile phone will start working as , creating wifi network with access to the Internet. In order for the Internet to work on your computer through a mobile phone, it is enough to connect to this Wi-Fi network.
It should be noted that the use of the "Access Point" function has a number of disadvantages:
- Not every mobile phone supports this feature. As a rule, only advanced smartphones provide such an opportunity.
- Using the hotspot feature drains your mobile phone's battery faster.
- Using the "Access Point" function leads to an increased consumption of Internet traffic.
- To connect to an access point, a Wi-Fi module must be installed on the computer.
Mobile phone as a modem
The second way to connect a computer to the Internet via a mobile phone is to use the mobile phone as a modem. In contrast to the "Access Point", this way Works with most modern mobile phones.
Because this connection method mobile internet quite complex, we will go through it step by step.
Step number 1. We connect the mobile phone to the computer.
Connect your mobile phone to your computer using a cable or . After connecting, install the program to synchronize your mobile phone with your computer. This can be Nokia Suite if you have a Nokia phone, or Samsung Kies if you have a Samsung phone. If your phone came with a CD with drivers, then install them as well.
After connecting and installing all necessary programs Your mobile phone's modem should appear in Device Manager.
Step #2: Create a new Internet connection.
After you have connected your mobile phone to your computer, you can start creating a new Internet connection. To do this, open Control Panel –> Network and Internet –> Network and Sharing Center.
In the "Network and Sharing Center" window, click on the "Set up a new network connection" link.
After that, the "Setting up a network connection" window will open in front of you. Here you need to select the item "Settings telephone connection” and click on the “Next” button.
In the next window, you must specify the dialed number, username and password. This data will be used by the modem to connect to the Internet. To find out your dialed number, login and password - contact your provider mobile communications.
After entering all the data, click on the "Connect" button. If you did everything right, then your computer should be able to connect to the Internet.
Within this article, the steps of using a mobile communicator as a modem are considered in order to connect a computer or laptop with Windows OS to the Network. Also paid attention to the question of how to set up the Internet on a Chinese phone.
What you need to have to connect
Requires a mobile phone with a built-in 3G, EDGE or GPRS modem. Any model of a Samsung, Nokia, Sony or other brand communicator may also be suitable. You need a USB cable to connect your phone to a computer. The wire can be replaced with a Bluetooth device. It is clear that in this embodiment, the computer and phone must have the appropriate adapters. You must have a modem driver or a program to synchronize with your communicator. The software is most often delivered on a disk at the same time as the phone, and there is also an opportunity for free download of everything you need on the manufacturer's website. Requires a SIM card from a valid mobile operator with a positive account balance. It is necessary that the data service is active for the SIM card. This can be found out from the operator, and when the possibility is not available, make a request to connect it. It is also necessary to define a tariff plan and configure unlimited Internet to the phone. Must inquire at the center after-sales service or on the website of the mobile operator how to make initialization and dial-in number for the communicator. They will need to be noted in the modem settings, as well as during the creation of the connection. The choice of a service provider needs to be given especially more attention, because the quality and speed of an Internet connection for different providers can vary significantly. These parameters also depend on the region of residence and time of day.
How to connect
Setting up a connection when you need Internet on your phone through a computer is carried out in several stages. Install the driver and connect the phone to a PC or laptop. First of all, you need to install a synchronization program on your computer, and then connect your phone to it using a cord or via Bluetooth. When there is no connection application, but you need Internet on your phone through a computer, and there is only a folder containing driver files, you first need to connect the communicator to the PC. When the system starts installing new hardware, mark the path to this directory inside the required box.
Carrying out setup
Open access to the device manager of the operating system. In the "Modems" section, find the model of your phone, click the "Properties" item. In the new window, go to the tab with additional communication parameters and in the column with the commands, make an initialization string. Then press the consent button. As mentioned earlier, all the necessary data, if you need Internet on your phone through a computer, you need to find out in service center. Of course, the initialization string will determine which service can be used. As a rule, for each tariff plan provides its own parameter.
How to create a connection
The procedure for accessing the Internet on your phone through a computer at this stage depends on the version of Windows. In the "Start" menu, go along the path: "Control Panel", then "Network and Internet Connections". In the next step, double-click on the Wizard icon. In the first window, click Next. In the "Type of network connection" check the box "To the Internet". Click "Next". In the next step, select "Manual connection settings". Next, consider the procedure for setting up the Internet on a Chinese communicator. We will describe the necessary actions using the example of the MegaFon network and a copy of the iPhone smartphone from China. The setup procedure is typical for all major telecom operators. Must be ordered by special number automatic settings, and then save them. Thus, it does not matter which manufacturer's phone you use. If you are a MegaFon subscriber, you can always call the customer service at 0500 in order to get the settings for the communicator. Provide the operator with the required data. As a result of the conversation, you will receive a message on your phone with the necessary settings.
How to disable ads on Android: remove pop-up ads
The Russian received a term and a million fine for "piracy Negative consequences of the law
Identification of key factors
The criteria for classifying organizations and individual entrepreneurs as small and medium-sized businesses have changed
See what "Royalty" is in other dictionaries Pitfalls of legislation