The Internet has tightly entered modern life, so setting it up on a phone or tablet can be quite an urgent task. To get the Internet settings necessary for MTS on the phone, many subscribers often turn to service center or contact the operator. However, this can take a long time, since you can wait more than one hour on the technical support line before the subscriber contacts the operator. In order for the subscriber to receive the MTS Internet settings, you need to follow a simple algorithm of actions.
Setting up an Internet connection MTS
In order for a phone or smartphone to communicate with the network, GPRS and WAP are required. Almost all modern models support these functions. However, if the subscriber has an older model, then you should check their availability on the phone.
Internet autoconfiguration
Automatic MTS Internet settings are the most in a simple way access the world wide web with mobile device. There are several ways to get these settings:
- call to number 0876;
- sending SMS messages without text to number 1234;
- using a personal account on the MTS website.
As soon as the request has been sent and successfully processed, the settings will be sent to the device, they must be saved. After that, the function of accessing the Internet from this mobile device will become available. The operator claims that no further actions need to be taken to set up. This option is completely free, and the cost of Internet traffic will be charged according to the user's tariff plan.
In order for the function to work properly, the mobile operator recommends rebooting the device after receiving and saving the settings.
Manual Internet setup
If for some reason the data has not arrived or is not saved, there are manual settings for the MTS Internet. They are typical, so the MTS Internet settings on Android are not much different from iOS. There may be slight differences in the names of the menu sections, however general order action is saved:
- you need to go to the device settings;
- select the wireless settings item;
- create a point remote access APN Internet MTS;
- specify the connection address - internet.mts.ru;
- set your connection type to GPRS;
- as username and base password use mts.
This data is basic and does not differ from device to device. The MTS Internet settings on the iPhone differ only in the menu in which the access point is created. It can be created in the "Cellular data" section, for this you must enable the 3G option, after which it will be possible to create a new APN connection.
WAP settings on MTS
Setting up MTS mobile Internet by WAP type usually occurs automatically. If there is a need for manual settings, then for this there is a certain procedure and data that will help the phone or tablet work:
- A point named MTS WAP is created on the device.
- In the field of the starting address, write wap.mts.ru.
- The access point type is set to GPRS.
- The connection address is the same as the start page.
- The IP address of the device must be specified as follows - 192.168.192.168.
- Specify the following data in WAP port settings. If WAP 1.x - 92-1, if WAP 2.x - 8080.
- mts is also used as username and password.
Using the MTS modem and setting it up
Since the phone may not always be convenient for Internet surfing, requesting Internet settings from the MTS operator helps to use the device for access from other points, for example, a PC or tablet without a SIM card in it.
Many modern phones have special function, which allows you to create a connection and use your phone as a router or modem. This feature comes at an additional cost, even on plans that offer unlimited internet usage.
The gadget can also be used as a network modem by directly connecting it to a computer. In order to set up such a connection, you will have to use the control panel, which will launch the Connection Setup Wizard program. To learn more about this option, there is a corresponding section on the MTS website. However, such a connection is becoming less relevant due to mobile modems and the ability to use the phone as a remote access point to the network.
Since ordering Internet settings is quite simple, you should not contact the operator about this, since contacting him is quite problematic. You can set up the Internet on a phone of almost any model using a few simple steps, which are described in detail on the official MTS website. There you can go to your personal account. Using it will make the installation process even easier and faster.
30.07.2018
How to order Internet settings on Tele2? This question can arise for every person if for some reason you cannot connect to the World Wide Web from your phone automatically. We will tell you how to get Tele2 Internet settings on your phone in two main ways - via SMS and on the official website of the operator.
Terms
To successfully request Internet settings from Tele2, several conditions must be met:
- If your phone has two slots for SIM cards, then the Tele2 SIM card must be in the first one.
- Check that data transfer is enabled on your device.
- After receiving a message with data, you need to save them, and then be sure to restart the phone.
Method 1 - SMS
Here's how to request Internet settings on Tele2 via SMS:
- Dial 679 . The call will be free.
- In response, you can receive SMS with Internet settings on Tele2. Save them and then reboot your device.
- Ready!
Method 2 - USSD command
Using the command *202# you can also get all the necessary data, however, they will have to be entered manually. The system will be able to send them to you also in the form of SMS, and you yourself enter all the parameters in the right places.
Method 3 - official site
On the official website of Tele2 you can also order automatic settings Internet Tele2. Here's how to do it:
- Connect to the world wide web with Wi-Fi.
- Open this link to the official website.
- Click on the "Get Settings" button.
- If you are not yet authorized, then click on the link that opens the entrance to the site.
- Enter your number in the login form and click "Login".
- A temporary login password will be sent to your phone in a message. Rewrite it in the appropriate column and enter the site.
- Select "Order automatic Internet and MMS settings".
If you are interested in information about that, follow the link and read another article on our website.
Method 4 - help from a specialist
In case you are not sure that you can deal with this problem on your own, there is an alternative option - to come to the store where you took the SIM card or to any Tele2 communication store and ask an employee to help you set up your phone or tablet.
Although this approach to the communication salon will take you a little time, you will be sure that everything is set up correctly and you will not be left without a connection to the worldwide network. The help of a specialist in this case will be free.
06.01.2018
It is useful for smartphone users to know how to properly set up Beeline mobile Internet on an Android device. In most cases, it is enough to insert a SIM card so that access to the World Wide Web is automatically configured. There is no need to do anything manually. But sometimes unforeseen problems arise, as a result of which the Internet is not available.
The General Packet Radio Service is a packet based wireless service used to send and receive data over the Internet Protocol. Any service accessible via the Internet such as email, chat, web browsing, mms will be available on a mobile phone. Because activation is required prior to setup, you should be aware that the activation process varies from one vendor to another.
Therefore, it is recommended to rely on the information provided directly by the service provider. Again, the activation process may differ for postpaid and prepaid customers. It also provides links to the respective service provider for your convenience.
This guide will help you access the network manually or use the automatic installation function. Keep in mind that not being connected to a network does not in itself mean that you need to configure something. If a connection fails, there can be many reasons.
Automatic setting
Mobile operators are well aware that most subscribers categorically do not want to understand the settings of their devices. Beeline has developed a special system for automatically creating access to the Web on a smartphone. In this case, the necessary parameters come from the provider to the subscriber's phone and are set independently.
Activation is free for both postpaid and prepaid customers. After activation, you need to save the service settings that are sent on your phone. Note. You will get 3 or 4 settings, save these settings in your mobile phone as default settings.
Step 2: Set the way to automatically unlock the device
You can leave all other fields blank as they are and keep these settings. Send a text message to 131 using your phone model to get your phone settings.
How to add your location
How to delete your home location. How to change the location of your house.- When you carry your device with you.
- When your device is in a certain location.
- When your device recognizes your face.
- Click "Home".
- Click "Activate this location".
For automatic configuration, you need to dial 0880. After that, the smartphone or tablet will receive a message that contains all the necessary parameters. In order for the changes to take effect, you must click "Save", enter the code 1234 and restart the device. Thanks to these simple manipulations, the connection is configured.
Test your security when using trusted devices
For a more accurate location, add your home's actual location to building complex like a normal place. From the Smart Lock menu, select Trusted Devices. . Your device may not always be able to determine if a connection is copy-protected. If you receive a notification on your phone: If the device cannot determine if the connection you are using is secure, you will receive a notification. You may need to manually unlock your phone before a trusted device unlocks it.
Sometimes a situation may arise when the necessary parameters for some reason are not registered in the phone. The most likely cause is a rare, little-known device model that is not recognized by the system. In some cases, the operator sends incorrect settings to the subscriber. If this problem occurs, you will have to fix it manually.
Manual setting
Different smartphone models (Samsung, Motorola, etc.) have different operating systems, so the setup process may differ slightly in some cases. On the official website of the Beeline company, there is even one for specific device models. It is important to consider that the processes for Android, iOS and Windows Phone gadgets may be different.
You need to create an APN access point and name it Beeline Internet. To do this, you need to fill in several fields:
- enter internet.beeline.ru in the APN line;
- "Username" - beeline;
- "Password" - beeline;
- "Authentication type" - PAP;
- "APN type" - default;
- "APN protocol" - IPv4.
The most important of all these points are the first three. Other options are not available on all models. If there are only 3 points on the smartphone, this will be enough. After making changes, be sure to restart your phone. If everything was done correctly, then after turning on the device again, the Internet should work. Otherwise, you will have to contact the nearest Beeline service center for help.
Usually, when activating a SIM card, Internet access is configured automatically, and nothing special needs to be connected. However, there are exceptions to every rule, and if you do not have Internet access from your phone, then this article will tell you how to set up the Internet on Beeline manually or order automatic mobile Internet settings.
I want to draw your attention to the fact that the lack of Internet access does not always mean that it needs to be configured. Therefore, I recommend reading it, which describes the most common reasons why the Beeline mobile Internet may not work.
Automatic setting of mobile Internet Beeline
Beeline knows that not all subscribers like to tinker with the manual settings of their own gadgets, so the company provided for the possibility of sending automatic Internet settings to the subscriber's phone. All that is required of you is to save the received parameters and start using the mobile Internet.
To order automatic Internet settings Beeline, call 0880 . Your phone will receive a message with the required parameters. To install them on your phone, click the "Save" button, enter the password 1234 and reboot the device. After these simple steps Mobile Internet on your phone will be configured, and you will be able to access the Web from your device.
It very rarely happens that the settings are not installed on the phone, or the phone is detected incorrectly by the system, and wrong settings the Internet. In this case, you will have to configure the mobile Internet manually.
How to set up mobile Internet on Beeline manually?
Different phones, depending on their operating systems, may have different manual configuration paths. On the official website of Beeline, you can find instructions and parameters for setting up mobile Internet specifically for your phone model. And in this article I will give examples of setting up mobile Internet on devices based on Android, iOS and Windows phone.
In short, the whole phone setup comes down to creating an APN access point with the name "Beeline Internet". During its creation, you will need to enter data in just a few fields.
Parameters for setting up Beeline mobile Internet
APN- internet.beeline.ru
Username - beeline
Password - beeline
Authentication type - PAP
APN type - default
APN protocol - IPv4
Of these fields, the most important are the first three. The rest may not be available at all in the settings of your phone model. Do not be upset because of this - you will still be able to set up mobile Internet.
Check if mobile data transfer is allowed
Before you proceed directly to creating an Internet access point, I recommend that you check whether mobile data transfer is enabled on your phone. Otherwise, even if you enter the correct settings, the mobile Internet will still not work.
Modern mobile phones tend to automatically produce all necessary settings to connect to the network: when activating the SIM card parameters are ordered. But in some cases this does not happen, so you will need to get the data yourself.
After purchasing a SIM card and installing it, you can immediately use telephone services. However, to access the network, you need to perform additional steps. In most cases, you must specify custom settings in your mobile device.
Operator mobile communications provided several ways in which any subscriber can prepare his phone for connection. First of all, you need to know how request automatic Internet settings Tele2. This free service « Automatic Internet/MMS setup» is the simplest and fast way set up a mobile device to access the network.
Tele2 Internet settings via SMS
To find out how to get automatic Internet settings on Tele2, you need to call a toll-free number 679 .
An autoresponder will notify you that your application has been accepted. During the call, the model of your mobile device will be determined. In accordance with these data, Internet auto-tuning on Tele2 will be prepared.
In about a minute, the mobile will receive four text messages. The first two warn the user about the arrival of information about the parameters, and the next contain these parameters. You need to open incoming SMS and save settings.
Depending on the model mobile phone you can establish a connection by clicking the "set" button. Profile needs to be activated Tele2 Internet" and restart mobile device.
You can get detailed information about promotions and discounts on mobile Internet by calling the toll-free number 639. You can also find out how to receive SMS with Tele2 Internet settings by going to the official website of tele2.ru in the section " Internet».
If during a call to a number 679 the system could not determine the model of your mobile device, then automatic settings are not available for it. In this case, you will have to connect manually.
Manual Internet settings
In addition to automatic mode, you can manually configure Tele2 Internet settings. You can find the required parameters in two ways:
- On the Tele2 website.
- By making a USSD request *202# .
How to set up the Internet on Tele2 manually using the site: 
- Open the official website of the tele2.ru company.
- Choose a section " Internet».
- Follow this link " Internet settings».
- Open the link " Setting up your phone for Internet and MMS».
This page lists Internet and MMS settings suitable for all phone models.
If the Internet settings did not come?
Some users are faced with a problem when the Internet settings on Tele2 do not come. This can happen for several reasons:
- No data transfer.
During a call to a number 639 the phone transmits technical information about itself, such as brand and model. According to these data automatic system selects the appropriate settings for sending them in an SMS message. If there is no data, it is not possible to search and send messages.
- Your phone model was not found in the database.
The operator has an extensive database of phone models, according to which SMS messages containing the necessary settings are generated. If you are the owner of a rare model that is not in the database, automatic connection is not possible.
Settings installed but internet not working
Subscribers often find themselves in a situation where there is no access to the network, despite the fact that all settings have been saved and installed. In this case, the user can take a number of actions to eliminate the causes:
- Check profile. The "Tele2 Internet" profile must be installed.
- Check your balance. It must be positive for a successful connection. You can get information about the balance of funds in your account in two ways:
- using Personal Area,
- by typing the USSD command *105# .
Go to the site my.tele2.ru to enter your personal account. To log in, use one of the suggested methods. On the page that opens, you will find information about the current tariff plan and account balance. You can pay without commission using bank cards MasterCard and Visa, Diners Club International, JCB International or use the service.
All Tele2 subscribers, by purchasing a new SIM card, can use the Internet, receive or send SMS and MMS without setting up their phone. WAP/MMS/Internet services are connected to all subscribers free of charge.
How to get automatic Internet settings from Tele2?
You can order free automatic settings necessary for the correct operation of WAP/MMS/Internet services for most models of mobile devices that support GPRS /EDGE technologies. To do this, just call the toll-free number 679 .
Is it possible to set up the Internet manually?
Yes it is possible. Below are typical GPRS/MMS/JAVA/WAP settings for most modern phones/smartphones/tablets.
Internet GPRS settings.
MMS settings.
| Setting name | Tele2 MMS |
| Homepage | mmsc.tele2.ru |
| Proxy server | Included |
| IP address | 193.12.40.65 |
| Port | 9201 (WAP1) or 8080 (WAP2) |
| Channel (type) of connection | GPRS |
| Access Point (APN) | mms.tele2.ru |
| User (Username) | [not required] |
| Password | [not required] |
After manual setting phone, be sure to send a test MMS message to anyone (for example, to yourself). This is necessary to register you in the Tele2 network as a user of the MMS service. Otherwise, instead of incoming MMS messages, you will receive a link to the MMS Gallery, where all MMS messages sent to you will be posted.
Java settings.
In order to be able to use Java applications that require Internet access (such as Opera mini or Jimm), some phones require a Java profile to be set up.
WAP settings.
In order to be able to view WAP pages and access the Internet directly from your mobile device, you need to make the following settings.
| Setting name | Tele2 WAP |
| Homepage | wap.tele2.ru |
| Proxy server | Included |
| IP address | 130.244.196.90 |
| Port | 9201 (WAP1) or 8080 (WAP2) |
| Channel (type) of connection | GPRS |
| Access Point (APN) | wap.tele2.ru |
| User (Username) | [not required] |
| Password | [not required] |
What is the cost of mobile Internet from Tele2?
It makes no sense to publish tariffs here. they change periodically. One thing is for sure, that the cost of WAP and GPRS is charged differently. Learn more on the company's website.
How to set up a smartphone/tablet based on Android, iOS (iPad, iPhone) or other OS to access the Internet?
Settings → Wireless networks → Mobile network→ Access points (APN).
Settings → General → Network → Cellular data network.
Write the following:
API: internet.tele2.ru
Username:[not required]
Password:[not required]
GPRS access via cell phones for computers, laptops, PDAs, etc.
Before you start setting up your personal computer, make sure that your phone:
1.
Supports GPRS/EDGE technologies. This information can be found in the user manual or on the mobile device manufacturer's website.
2.
Configured to work with WAP/MMS/Internet services.
Necessary equipment.
In addition to a phone that supports one of the GPRS/EDGE technologies and configured to work with WAP/MMS/Internet services, you will need a personal computer, laptop or PDA. In addition, you may need a cable to connect your phone to your computer.
Connecting phone to computer.
There are 3 ways to do this.
Method 1: Using a cable for a COM or USB port.
If this cable was not included with your mobile phone, you can purchase it at a mobile phone and accessories store. When choosing a cable, make sure that it is suitable for connecting to the computer of this phone model, and that the cable supports data transfer (some cables are designed only for data synchronization, that is, editing the phone book, downloading and editing pictures and phone ringtones, and etc.).
Method 2: Connect via infrared (IR) port.
In this case, your mobile phone and computer must be equipped with infrared ports.
Method 3: Connect via Bluetooth. In this case, your mobile phone and computer must be equipped with a Bluetooth receiver and transmitter.
Set up your phone as a modem.
After connecting the phone to the computer, you will need to set the phone as a modem. To do this, you will need drivers, which in most cases can be found on the CD that comes with the phone. If there is no such CD, necessary programs can be found on your phone manufacturer's website.
Setting up a modem phone.
After installation and configuration software find installed operating system modem (the name of the phone connected to the PC) and by right-clicking on its image, select "Properties" from the pop-up menu. Or open the "Control Panel", select "Phone and Modem", and in the window that opens - the "Modems" tab, specify the installed modem and click "Properties".
In the modem properties window, select the "Advanced communication settings" tab and enter an additional initialization command with the name of the access point (Access Point Name, or APN). To access the Internet through the Tele2 network, you must use the initialization string: AT+CGDCONT=1,"IP","internet.tele2.ru"
Establishing a dial-up connection.
There are 2 options to do this.
Option 1. Automatic creation of a remote telephone connection.
If your mobile phone manufacturer provides a special program for accessing the Internet, run this program on your computer. Use the following information as settings:
APN: internet.tele2.ru
Call numbers:
| Samsung | *99**1*1# |
| Alcatel, Siemens, Panasonic | *99***1# |
| SonyEricsson, Motorola, Nokia, LG, Pantech and others | *99# |
Username and password: leave blank.
Option 2. Manual creation of a remote telephone connection.
In this case, you will need to create a new Internet connection on your computer. Use the following information as settings:
Phone number: *99#
Username and password: leave blank
If you are unable to connect to the network, try changing the set phone number to *99***1#
.
Additional characters ***1
indicate the WAP profile and the settings used in the phone with CID 1.
When connecting to the Internet with Internet settings, make sure that the APN access point is specified in the phone settings: internet.tele2.ru.
If you have specified access point APN: wap.tele2.ru, GPRS billing will be based on WAP prices.
How to disable ads on Android: remove pop-up ads
The Russian received a term and a million fine for "piracy Negative consequences of the law
Identification of key factors
The criteria for classifying organizations and individual entrepreneurs as small and medium-sized businesses have changed
See what "Royalty" is in other dictionaries Pitfalls of legislation